Suchfeld
Contact

Opening hours:
Monday to friday: 7:00 - 17:00 o'clock
Competent advice:
Tel. 00492932/9771-23
E-Mail:
info@quality-bearings.com
You can ask in English, Russian, Italian, Spanish, Polish, French ...

Tapered roller bearings

Tapered roller bearings consist of solid outer and inner rings with tapered raceways and tapered rollers in a window cage. The bearings are available as: standard design, open variant matched in pairs, integral design JK0S sealed on one side. Open bearings are not self-retaining. This allows the inner ring with the rollers and the cage to be installed separately from the outer ring. Metric dimensions and inch dimensions are available. Versions with a K in the abbreviation are in inches. However, metric dimensions should always be preferred for new designs. Roller bearings in the T7FC series are supplied in the X-life design. These bearings have improved surfaces, a more efficient combination of material and heat treatment, and optimized contact geometry. This improves the friction behavior and increases the dynamic load rating. With the same operating conditions, a significant increase in the nominal service life is achieved. For certain applications, the bearing can be dimensioned smaller. Tapered roller bearings absorb high radial and one-sided axial loads. A second bearing is normally required for axial counter-guidance, which is then arranged in a mirror-inverted manner. The axial load capacity depends on the contact angle; that is, the larger the angle, the higher the axial load that the bearing can bear. The size of the contact angle and thus the load capacity is identified by the bearing-dependent value e in the dimension tables. Bearings in the 313, 323..-B, T5ED and T7FC series can withstand very high axial loads due to their particularly large contact angle. The modified line contact between the tapered rollers and raceways ensures optimal stress distribution at the contact points, prevents edge stress and enables the bearings to be angularly adjustable. At the load ratio P/Cr ? 0.2, the tilting of the bearing rings to each other may not exceed 4 arc minutes. For larger loads or tilting, please contact us. Standard and matched tapered roller bearings are not sealed. Integral tapered roller bearings JK0S have a lip seal on one side. Standard and matched tapered roller bearings can be lubricated with oil or grease. Integral tapered roller bearings JK0S are filled with quality grease. Integral tapered roller bearings: JK0S series roller bearings are sealed on one side and ready to install, which are mainly installed in pairs in an O arrangement. They cannot be dismantled and do not need to be re-greased. Tapered roller bearings do not require adjustment of the axial clearance: the axial clearance of the pair of bearings does not have to be adjusted. It results from the very close tolerance of the overhang (dimension u) between the inner and outer ring when the inner rings are clamped with a shaft nut or shaft end cap. The inner and outer rings are given a tight fit so that the correct axial clearance is set after installation. In the case of integral tapered roller bearings installed in pairs in an O arrangement, the suitable groove for the snap ring BR is formed on the outer ring. The snap ring must be ordered separately. Open tapered roller bearings can be used at operating temperatures from -30 °C to +120 °C. For continuous operating temperatures above +120 °C, please contact us. Bearings with lip seals can be used at operating temperatures from -30 °C to +110 °C, limited by the grease and the sealing ring material. Open tapered roller bearings have cages made from sheet steel. In the case of integral bearings JK0S, the cages are made of glass-fibre reinforced polyamide 66.

 

  • 111050-111090-P from Gamet

    111050-111090-P

    Type: Tapered roller bearings
    Producer: Gamet
    Dimension (Inner x Outer x Width): 50x90x29 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:768.24EUR
  • 124070-124112-XC from Gamet

    124070-124112-XC

    Type: Tapered roller bearings
    Producer: Gamet
    Dimension (Inner x Outer x Width): 70x117x35 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:659.60EUR
  • 130070-130120P from Gamet

    130070-130120P

    Type: Tapered roller bearings
    Producer: Gamet
    Dimension (Inner x Outer x Width): 70x120x65,44 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:1
    Net price:799.28EUR
  • 140080-140140-HEO from Gamet

    140080-140140-HEO

    Type: Tapered roller bearings
    Producer: Gamet
    Dimension (Inner x Outer x Width): xx mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:1
    Net price:1249.36EUR
  • 140080-140140-P from Gamet

    140080-140140-P

    Type: Tapered roller bearings
    Producer: Gamet
    Dimension (Inner x Outer x Width): xx mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:2
    Net price:1202.80EUR
  • 29685-2-Q from SKF

    29685-2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 73,03x112,71x25,4 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:2
    Net price:46.06EUR
  • 30202-A from FAG

    30202-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 15x35x11,75 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:22
    Net price:9.93EUR
  • 30203-DY from FAG

    30203-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 17x40x12 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:97
    Net price:8.76EUR
  • 30204-A from FAG

    30204-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 20x47x15,25 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:41
    Net price:9.75EUR
  • 30204-DY from FAG

    30204-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 20x47x14 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:133
    Net price:9.24EUR
  • 30204-J2-Q from SKF

    30204-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 20x47x14 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:146
    Net price:8.46EUR
  • 30205-A-XL from FAG

    30205-A-XL

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 25x52x15 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:11.38EUR
  • 30205-DY from FAG

    30205-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 25x52x15 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:39
    Net price:10.23EUR
  • 30205-J2-Q from SKF

    30205-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 25x52x15 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:150
    Net price:9.36EUR
  • 30206-A from FAG

    30206-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 30x62x17,25 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:49
    Net price:11.86EUR
  • 30206-A-Q-P5 from IBC

    30206-A-Q-P5

    Type: Tapered roller bearings
    Producer: IBC
    Dimension (Inner x Outer x Width): 30x62x17,25 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:45.01EUR
  • 30206-J2-Q from SKF

    30206-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 30x62x17,25 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:11.12EUR
  • 30206-P5 from FAG

    30206-P5

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 30x62x17,25 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:34.14EUR
  • 30207-A from FAG

    30207-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 35x72x17 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:15.05EUR
  • 30207-DY from FAG

    30207-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 35x72x17 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:15.05EUR
  • 30207-J2-Q from SKF

    30207-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 35x72x17 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:96
    Net price:13.25EUR
  • 30207-XL from FAG

    30207-XL

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 35x72x17 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:27
    Net price:15.84EUR
  • 30208-A from FAG

    30208-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 40x80x19,75 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:17.06EUR
  • 30208-DY from FAG

    30208-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 40x80x18 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:16.16EUR
  • 30208-J2-Q from SKF

    30208-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 40x80x18 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:5
    Net price:16.71EUR
  • 30208-XL from FAG

    30208-XL

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 40x80x19,75 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:17.06EUR
  • 30209-J2-Q from SKF

    30209-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 45x85x19 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:17.13EUR
  • 30209-X-DY from FAG

    30209-X-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 45x85x19 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:7
    Net price:18.07EUR
  • 30210-A from FAG

    30210-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 50x90x21,75 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:2
    Net price:23.59EUR
  • 30210-A-P5 from FAG

    30210-A-P5

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 50x90x20 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:46.56EUR
  • 30210-DY from FAG

    30210-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 50x90x20 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:32
    Net price:22.35EUR
  • 30210-J2-Q from SKF

    30210-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 50x90x20 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:22.63EUR
  • 30211-A from FAG

    30211-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 55x100x21 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:8
    Net price:28.26EUR
  • 30211-A-P5 from FAG

    30211-A-P5

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 55x100x22,75 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:58.20EUR
  • 30211-DY from FAG

    30211-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 55x100x21 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:111
    Net price:26.84EUR
  • 30211-J2-Q from SKF

    30211-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 55x100x21 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:1
    Net price:27.73EUR
  • 30212-A from FAG

    30212-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 60x110x23,75 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:31.89EUR
  • 30212-DY from FAG

    30212-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 60x110x22 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:30.22EUR
  • 30212-XL-P5 from FAG

    30212-XL-P5

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 60x110x23,75 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:8
    Net price:85.36EUR
  • 30213-A from FAG

    30213-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 65x120x24,75 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:39.32EUR
  • 30213-A-P5 from FAG

    30213-A-P5

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 65x120x24,75 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:5
    Net price:81.48EUR
  • 30213-DY from FAG

    30213-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 65x120x23 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:37.25EUR
  • 30213-J2-Q from SKF

    30213-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 65x120x24,75 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:1
    Net price:37.05EUR
  • 30214-A-P5 from FAG

    30214-A-P5

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 70x125x24 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:3
    Net price:91.57EUR
  • 30214-DY from FAG

    30214-DY

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 70x125x24 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:59
    Net price:42.97EUR
  • 30214-J2-Q from SKF

    30214-J2-Q

    Type: Tapered roller bearings
    Producer: SKF
    Dimension (Inner x Outer x Width): 70x125x24 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:2
    Net price:41.75EUR
  • 30215-A from FAG

    30215-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 75x130x27,25 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:1
    Net price:51.53EUR
  • 30215-A-P5 from FAG

    30215-A-P5

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 75x130x25 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:100.88EUR
  • 30216-A from FAG

    30216-A

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 80x140x28,25 mm
    Price without VAT, plus shipping Shipping costs
    Available on request
    Net price:54.87EUR
  • 30216-A-P5 from FAG

    30216-A-P5

    Type: Tapered roller bearings
    Producer: FAG
    Dimension (Inner x Outer x Width): 80x140x26 mm
    Price without VAT, plus shipping Shipping costs
    Quantity in stock:3
    Net price:107.09EUR

0.4342648983