Opening hours:
Monday to friday: 7:00 - 17:00 o'clock
Competent advice:
Tel. 00492932/9771-23
E-Mail:
info@quality-bearings.com
You can ask in English, Russian, Italian, Spanish, Polish, French ...
Contact
GS87410 | INA
GS87410 from INA
Important names for ball bearings and accessories
- The suffix G describes an SKF lubricating grease label.
- The suffix GS stands for the housing washer of an axial cylindrical roller bearing. The inside diameter is slightly wider than the shaft diameter. See also WS.
Further technical information on additional symbols for rolling bearings and accessories can be found here: Product codes
| Product features | |
| Inside diameter (mm) | 52 |
|---|---|
| Outside diameter (mm) | 110 |
| Width (mm) | 9,5 |
| Product weight (kg) | 1 |
| Typ | Housing washers |
| Producer | INA |
| Bearing number/code | GS87410 |
| Country | DE |
| Minimum order (piece) | 1 |
| EAN | 4012802449228 |
Housing washers
Housing washers are centered on the outside and must be used if the adjacent construction cannot be used as a running surface. Bore diameter, outside diameter and running surface are precision machined. The diameter series 1, 2, 3, 4 correspond to DIN 616/ISO 104. Wave washers are internally centered and must be used if the adjacent construction cannot be used as a running surface. Bore diameter, outside diameter and running surface are precision machined. The diameter series 1, 2, 3, 4 correspond to DIN 616/ISO 104. Running washers can be used as housing and shaft washers; they are used in applications that do not require accurate centering. Bore diameter and outside diameter are turned, the running surface is ground. Running discs are suitable for axial cylindrical roller and cage assemblies K811 and axial needle roller and cage assemblies AXK. Axial cylindrical roller bearings and rims can be used at operating temperatures from -20 °C to +120 °C.