Opening hours:
Monday to friday: 7:00 - 17:00 o'clock
Competent advice:
Tel. 00492932/9771-23
E-Mail:
info@quality-bearings.com
You can ask in English, Russian, Italian, Spanish, Polish, French ...
Contact
NDK80 | FAG
NDK80 from FAG
Important names for ball bearings and accessories
- The suffix N stands for: 1. Annular groove in the jacket of the outer ring, 2. For INA radial insert ball bearing housings: cast housing with groove recess for protective caps. Type N cylindrical roller bearings have two fixed ribs on the inner ring and an outer ring without ribs. They allow axial displacements in both directions between the shaft and the housing, i. H. the unconstrained length expansion compensation within the bearing within certain limits and are therefore used as floating bearings.
Further technical information on additional symbols for rolling bearings and accessories can be found here: Product codes
| Product features | |
| Inside diameter (mm) | 416 |
|---|---|
| Outside diameter (mm) | 416 |
| Width (mm) | 20 |
| Product weight (kg) | 9.7 |
| Typ | Covers |
| Producer | FAG |
| Bearing number/code | NDK80 |
| Country | DE |
| Minimum order (piece) | 1 |
| EAN | 4054364223182 |
Covers
To protect bearings at shaft ends and to eliminate the risk of accidents caused by free shaft ends, end caps are available in the following versions for Y-bearing housings and Y-bearing units: ECY, ECW, ECL. Polypropylene (PP) end caps are resistant to most chemicals and withstand service temperatures up to 100°C (210°F). For assembly, the covers are snapped into the recess of the housing bore. Danger from rotating components. To avoid serious injury, do not install or remove the end cover until the shaft has stopped rotating and the machine has stopped, or after the shaft has been locked and will not rotate.